Items where Subject is "Faculty of Engineering > Department of Mechanical Engineering
Divisions > Faculty of Engineering > Department of Mechanical Engineering"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | D | E | F | G | H | J | K | L | M | N | O | P | R | S | T | Y | Z
Number of items at this level: 73.

A

Abbaspour, Ghader and Ghaebi, Hadi (2015) Thermoeconomic Assessment of a Multi-effect Desalination Coupled to a Combined Cooling, Heating and Power (CCHP) plant with gas turbine prime. Masters thesis, university of Mohaghegh Ardabili.

Abedini, Pejman and Mirzaei Ziapour, Behrooz and Miroliaei, Alireza (2016) Evaluate the Efficiency of Current Solar Water Heater Flow Boiling Polycyclic. Masters thesis, University of Mohaghegh Ardabili.

Abizadeh, Ali and Yari Daryaman, Mortaza and Ghaebi, Hadi (2015) Thermoeconomic Analysis of Absorption Thermal Systems. Masters thesis, university of Mohaghegh Ardabili.

Afzal Gendeshmin, Sadegh and Mirzaee ziapour, Behrooz and Mohammadi, Yaghoob (2016) Experimental study on the heat losses inside an enclosure with insulated walls from new compounds. Masters thesis, University of Mohaghegh Ardabili.

Ahari Salmasi, saeed (2017) Performance improvement of a compact solar collector using thermoelectric generator. Masters thesis, University of Mohaghegh Ardabili.

Ahmadi Alni, Hadi and Abdi Aghdam, Ebrahim and Masomian, Shahram (2016) Study Of Knock Intensity Of Gasoline-And Natural Gas-Air Mixtures At 10 Compression Ratio In CT300 Research Engine. Masters thesis, University of Mohaghegh Ardabili.

Ahmadi Saravani, Soheil (2017) Study on the Crushing Behavior of Double-Walled Structures Filled whith Foam under Axial and Oblique Dynamic Loading. Masters thesis, University of Mohaghegh Ardabili.

Alipour, Zargham and Abdi Aghdam, Ebrahim and Masomiyan, Shahram (2015) Study of the Effect of in-Cycle Engine Epeed Variations on Mass Fraction Burned. Masters thesis, university of Mohaghegh Ardabili.

Amini, Mehrdad and Mirzayi, Behroz and Shayeghi, Hossein (2014) Thermoeconomical َAnalysis Of Miscellaneous Co-Generathion Of Heat and Electricity Solar Systems. Masters thesis, university of Mohaghegh Ardabili.

Asbaghian Namin, Seyyed Feisal and Pilafkan, Reza and Shamkhali, Amir Naser (2016) Free Vibration Analysis of Nanoplates Using Nanlocal Elasticity Theory and Molecular Dynamics Simulation. Masters thesis, University of Mohaghegh Ardabili.

Asgari, Armin (2016) Design & Manufacturing of Solar Chimney Augmented by Energy Storage System. Masters thesis, University of Mohaghegh Ardabili.

Ashrafi, Alireza (2017) Experimental Investigation on the Prefabricated Walls to Reduce Heat loss. Masters thesis, University of Mohaghegh Ardabili.

Ashrafi Habibabadi, Fereshteh and Pilafkan, Reza (2017) Dynamic behavior controlling of functionally graded beams using piezoelectric layers. Masters thesis, University of Mohaghegh Ardabili.

Ashtiani, Alireza and Rahimi, Mostafa (2017) Numerical Investigation of Heat Transfer between an Annular Impinging Jet and Surface of an Axi-Symmetric Internal Cylinder. Masters thesis, university of Mohaghegh Ardabili.

B

Bajelan, Abdullah and Akbarimajd, Adel and zakavi, Seyed javid and mirzaeeziapour, Behrouz (2014) Design of a Pssive Dynamic Mechanism for Object Manipulation on a Circular Track. Masters thesis, University of Mohaghegh Ardabili.

Bavafa, Saeid and Zakavi, Seyed Javid and Abitorabi, Masoud (2015) Evaluation of Combined Hardening Model in Strain Accumulation of Pressurized Piping Elbows under Dynamic Out-of-Plane Bending. Masters thesis, University of Mohaghegh Ardabili.

Bayat, Abbas and Pirmohammad, Sadjad (2015) Study on the Temperature Effect of Fracture Behavior of Asphalt Concretes under Mixed Mode I/III Loading. Masters thesis, University of Mohaghegh Ardabili.

Bayat, Abbas and Pirmohammad, Sadjad (2015) Study on the Temperature Effect of Fracture Behavior of Asphalt Concretes under Mixed Mode I/III Loading. Masters thesis, university of Mohaghegh Ardabili.

Bijan, Mehdi and Abdi Aghdam, Ebrahim (2015) Study of Effect of the Residual Gas Fraction on Burning Velocity of Hydrogen-Isooctane. Masters thesis, University of Mohaghegh Ardabili.

D

Dehgani, Tohid (2018) Mixing investigation through a miniaturized channel by means of passive method. Masters thesis, University of Mohaghegh Ardabili.

E

Elkaei Behjati, Ali and Mirzaei Ziapour, Behrouz and Mir Oliaei, Alireza (2016) Performance Study of the Evaporation Coolers Using Solar Energy. Masters thesis, University of Mohaghegh Ardabili.

Esmaeili Marzdashti, Sobhan and Pirmohammad, Sajad (2016) Experimental and numerical study on the energy absorption behavior of bitubes with different sections under quasi static axial and oblique loading. Masters thesis, university of Mohaghegh Ardabili.

F

Farhang, Behzad and Abdi Aghdam, Ebrahim and Ranjbar Omid, Mohammad Reza (2015) Comparision of Engine Performance Using Gasoline- and NG-burn Cases at a Constant Compression Ratio and a Lean Equivalance Ratio in CT300 Research Engine. Masters thesis, university of Mohaghegh Ardabili.

G

Ghahramani Azar, Sajjad and Abdi Aghdam, Ebrahim (2016) Study of the Effect of Throttle Position on Mass Fraction Burned and Power with Gasoline Fuel for CT300 Single-Cylinder Research Engine. Masters thesis, University of Mohaghegh Ardabili.

Gholaminia, Vahid (2017) Analysis of Solar Energy Storage in Buildings Using Phase Change Materials (PCM). Masters thesis, University of Mohaghegh Ardabili.

H

Hadipour Behambari, Khadijeh and Pilafkan, Reza (2017) Investigating the thermal environment effects on free vibration of functionally graded skew plates with piezoelectric actuators using a meshfree method. Masters thesis, University of Mohaghegh Ardabili.

Hadisi, Sevil and Rahimi, Mustafa (2015) Analysis And Optimization Of Free Convective Air Flow Rate Through The Space Formed Between Two Vertical Channels. Masters thesis, University of Mohaghegh Ardabili.

Hajipour, Vahid and Abdi Aghdam, Ebrahim (2015) Study of the laminar burning velocity variations for the mixtures of Hydrogen and Iso-octane with Air. Masters thesis, University of Mohaghegh Ardabili.

Hojjati, Mohammad (2018) Investigating the effect of temperature cycling on fracture behavior of warm mix asphalt (WMA) concretes reinforced with natural fibers under mixed mode I/II loading using a new test specimen. Masters thesis, University of Mohaghegh Ardabili.

J

Jafari, Manaf and Mirzaei Ziapour, Behrooz and Sedaghati, Farzad (2018) Investigation of the solar cells cooling with different designs. Masters thesis, University of Mohaghegh Ardabili.

Jafari, Mohammad and Tahmasebipour, Mohammad (2014) Thermo-Mechanical Behavioral Analysis of Nanowire Using Molecular Dynamics Simulation. Masters thesis, university of Mohaghegh Ardabili.

Jahangiri, Payam and Zakavi, javid and Abitorabi, Masoud (2015) Study on Thermal Ratchetting Behaviour of Stainless Steel Specimens. Masters thesis, University of Mohaghegh Ardabili.

Jamali, Ehsan and Ghaebi, Hadi (2017) Utilization of Energy Storage System for Solar Absorption Power Cycle. Masters thesis, University of Mohaghegh Ardabili.

K

Kaffash mirzarahimi, Mahmood and Pilafkan, Reza and Shamkhali, Amir Naser (2016) Buckling Analysis of Nano-plates Using Nonlocal Elasticity Theory And Molecular Dynamics Simulation. Masters thesis, University of Mohaghegh Ardabili.

Karimzadeh, Hamed (2017) Effect of hydrogen addition to natural gas-air mixture on its lower explosion limit. Masters thesis, university of Mohaghegh Ardabili.

Khajehzadeh, Sina and Pilafkan, Reza (2017) Analysis of Magneto-Electro-Elastic Nanobeams using Meshless Local Petrov-Galerkin Method. Masters thesis, University of Mohaghegh Ardabili.

Khalilzadeh, Saman and Ghaebi, Ghaebi (2016) Performance Analysis of Different Working Fluids in Integrated System of Cascade Refrigeration cycle and organic rankine cycle. Masters thesis, university of Mohaghegh Ardabili.

Koulabadi, Abolfazl and Rahimi, Mostafa (2015) Numerical Analysis of Flow and Heat Transfer within the Air Gap between Rotor and Stator of a Turbo Generator. Masters thesis, University of Mohaghegh Ardabili.

L

Layalimoghadam, Samira and Yari, Mortaza (2014) Conventional and advanced exergetic analysis of steam power plant. Masters thesis, university of Mohaghegh Ardabili.

M

Malekzadeh, Babak and Zakavi, Javid and Abitorabi, Masoud (2016) Evaluation of Chaboche hardening model on the ratcheting behavior of carbon steel piping branch under seismic loading. Masters thesis, University of Mohaghegh Ardabili.

Mohamadi, Behnam and Abdi Aghdam, Ebrahim and Javidan, Javad (2015) The Drivation at Expermental Pressur-Crank¬ Angle for Free Burned Residual Gas Cycles and thair Analysis. Masters thesis, University of Mohaghegh Ardabili.

Mohammadi, Reza and Ghaebi, Hadi (2016) Thermodynamic analysis and performance assessment of an heat pump coupled with organic rankine cycle (ORC). Masters thesis, university of Mohaghegh Ardabili.

Mohammadi Asl, Hadi and Zakavi, javid and Rahimi, Alireza (2016) Study on Strain Accumulation of Stainless Steel Piping Branch Under in-Plane Bending With Combined Hardening Model. Masters thesis, university of Mohaghegh Ardabili.

Mostafaei, Hamed (2018) Study of low cycle fatigue in plain carbon steel pressurized cylinders under simulated seismic loading by Chaboche hardening model. Masters thesis, University of Mohaghegh Ardabili.

Motarez, Mahsa and Rahimi, Mostafa (2015) Effect of osilation of a slot nazzle on the heat transfer from an impingement plate. Masters thesis, University of Mohaghegh Ardabili.

Mousavi, Vahid and Ghaebi, Hadi and Miroliaei, Alireza (2017) Thermodynamic analysis of Chemical Looping Combustion. Masters thesis, university of Mohaghegh Ardabili.

maleki, Sajjad and Zakavi, javid and Shahi, peyman (2015) Simulation Investigation on the Effect of Injection Molded Part Defects on its Mechanical Performance. Masters thesis, University of Mohaghegh Ardabili.

N

Naseri, Muhammad and Mirzai Ziapour, Behrooz and Ahmadzadeh, Gholamreza (2015) Desalination Thermoeconomically Study in the Beach of Urmia Lake Using Solar Ponds. Masters thesis, University of Mohaghegh Ardabili.

Nasiri-Foulad, Mohammad and Rasekh, Mansour and Afkari-Sayyah, Amir Hossein and Abbaspour-Gilandeh, Yousef (2016) The effect of loading velocity, variety and tuber size on mechanical properties of onion. Masters thesis, university of Mohaghegh Ardabili.

Nazari Jobeni, Morteza and Abdi Aghdam, Ebrahim and Ranbar Omid, Mohammad Reza (2015) Theoretical-Experimental Study of Blowby in a Single Cylinder Variable Compression Ratio Research Engine in Motoring Condition. Masters thesis, University of Mohaghegh Ardabili.

Nematzadeh, Akbar and Zakavi, Seyed Javid (2018) Study on ratcheting of carbon steel plain pipework by different diameter/thickness ratio with nonlinear isotropic/ Chaboche kinematic. Masters thesis, University of Mohaghegh Ardabili.

Nikkhah, Hamid and Pirmohammad, Sadjad (2016) Study on the energy absorption capacity and crushing behavior of bitubes with different sections under oblique loading. Masters thesis, University of Mohaghegh Ardabili.

Nooshirvani, Siavash and Abdi Aghdam, Ebrahim and Ranjbar, Mohammad Reza (2014) Study of Spark Timing Effect on the Knock Occurrence in a CT300 Engine by Improving the System ot Spark Timing. Masters thesis, university of Mohaghegh Ardabili.

O

Ochi Ardebili, Nima and Abdi Aghdam, Ebrahim (2016) Study of the effect of Hydrogen adding tu natural gas – air mixture on its burning velocity at one bar initial pressure. Masters thesis, University of Mohaghegh Ardabili.

P

Parsiavash, Javid (2017) Design and construction of low pressure pump (1_4 bar) with combustion drive. Masters thesis, University of Mohaghegh Ardabili.

Poormohseni koloori, Majeed and Pilafkan, Reza and Zakavi, Seyed Javad (2016) On Dynamic Response Control of Nano Plats by Piezoelectric Layers Using a Mesh Free Method. Masters thesis, University of Mohaghegh Ardabili.

Poormohseni koloori, Majeed and Pilafkan, Reza and Zakavi, Seyed Javid (2016) On Dynamic Response Control of Nano Plats by Piezoelectric Layers Using a Mesh Free Method. Masters thesis, university of Mohaghegh Ardabili.

R

Rafiei Rad, Kasra (2018) Thermodynamic analysis of a novel multi generation system based on GT – MHR cycle. Masters thesis, University of Mohaghegh Ardabili.

Rahimi, Behzad and Rahimi, Mostafa and Abdi Aghdam, Ebrahim (2015) Combined Gaslight Burners for Temperature Increment. Masters thesis, University of Mohaghegh Ardabili.

Rahimi, Geyasaldin and Rahimi, Mostafa and Jafar Gholinejad, Shapour (2015) Impact of Using Blind on Heat Losses Through Windows of a Building. Masters thesis, University of Mohaghegh Ardabili.

Rahimi, Geyasaldin and Rahimi, Mostafa and Jafar Gholinejad, Shapour (2015) Impact of Using Blind on Heat Losses Through Windows of a Building. Masters thesis, University of Mohaghegh Ardabili.

Rasouli Mojez, Mehdi and Sadegh Moghalou, Farhad and Rahimi, Mostafa (2018) Mixing Enhancement Investigation of Two Miscible Liquids Using Fluid-Structre Interaction (FSI) Effects. Masters thesis, University of Mohaghegh Ardabili.

Rostami, Mohammad (2016) Two-dimensional modeling of bottom-up cracks in the perpetual asphalt concretes using finite element method. Masters thesis, University of Mohaghegh Ardabili.

S

Saadat, Mohammad and Mirzaei Ziapour, Behrooz (2016) Power Generation Enhancement in a Salinity Gradient Solar Pond using Thermoelectric Generator. Masters thesis, university of Mohaghegh Ardabili.

Shakeri, Elham and Abdi Aghdam, Ebrahim and Rahimi, Mostafa (2017) Estimation of mechanical efficiency using experimental data obtained by skip fire technique in a single cylinder research SI engine. Masters thesis, university of Mohaghegh Ardabili.

Shayestehnia, Elyas (2017) Study on strain accumulation of carbon steel piping branch under dynamic moments with combined hardening model. Masters thesis, university of Mohaghegh Ardabili.

Shiralivand, Behzad and Zakavi, Seyed Javid and Abitorabi, Masoud (2016) Evaluation of Combined Hardening Model on Ratcheting Behavior of Pressurized Pipng Elbows under In-Plane Bending Moments. Masters thesis, university of Mohaghegh Ardabili.

Shiri Ghaleejughy, Hamidreza and Ghaebi, Hadi (2017) Using Thermodynamic Cycles for Electricity Production in City Gate stations. Masters thesis, University of Mohaghegh Ardabili.

Shokrnia, Mehdi and Mirzaei Ziapour, Behrooz and Ahmadzadeh, Gholamreza (2015) Power Generation Thermoeconomically Study at the Beach of Urmia Lake Using Non-Convectional Solar Pond. Masters thesis, University of Mohaghegh Ardabili.

sokhanvar, Eisa and yari, Mortaza (2015) Analysis of flow and heat transfer in fuel cells. Masters thesis, University of Mohaghegh Ardabili.

T

Torabi, Saman (2018) Study of chaboche hardening model on strain accumulation of stainless steel cylinders subjected to dynamic moments. Masters thesis, University of Mohaghegh Ardabili.

Y

Yahak, Mohammad (2017) Experimental extraction of a range of start timing of fuel injection, considering entrance of total injected fuel of each injection only into a cycle. Masters thesis, University of Mohaghegh Ardabili.

Z

Zamani, Haddad (2017) Experimental Investigation and Finite Element Simulation of Brake Squeal. Masters thesis, University of Mohaghegh Ardabili.

This list was generated on Mon May 20 21:06:11 2019 +0430.